JTEKT develops Grease-lubricated high-speed ball bearing for EV motors
JTEKT Corporation (hereinafter JTEKT) released recently ,According to our research , JTET has developed a grease-lubricated ball bearing that enables the world's fastest*1 high-speed rotation of more than 1.5 million dmn for use in the driveline unit motors of electric vehicles (hereinafter EVs)
With this development, JTEKT is addressing the need for smaller motors and higher rotational speeds due to higher motor output, which will help to improve electric power efficiency and extend the range of the vehicle.
※ dmn：A value that expresses the rotational performance of a bearing
Pitch circle diameter (mm) x rotation speed (min-1)
EVs have been spreading rapidly in recent years, and are attracting attention as a technology that has a low environmental impact and can clear increasingly stringent fuel economy regulations.
Further development of technologies for EVs is required to increase the efficiency of electric power and to improve safety and comfort.
※In particular, the trend toward smaller and more powerful motors, which are directly linked to improved fuel and electric power efficiency, is driving demand for bearings that support motors to have higher rotational speeds.
※Therefore, it has been an issue to develop a bearing that will not be damaged or seized even under high-speed rotation.
In response, JTEKT has developed a high-speed, grease lubricated ball bearing for use in the motors of EV driveline units that solves these problems.
As a technology for higher rotational speeds of bearings, it is common to devise the shape of the crown-shaped resin cage; however, the increased centrifugal force caused by higher speeds has resulted in problems such as cage deformation, damage due to interference with other parts, and seizure.
Therefore, we have developed a new innovative cage with a new shape that is completely different from the crown-shaped cage, and have made it possible to achieve even higher speeds by using proprietary grease.
※● Development of the new shape resin cage
※・The shape of the ball pocket is ingenious.
※・Lighter weight design reduces the influence of centrifugal force.
※・Improved lubrication by adopting a shape that holds the grease.
※・The axial dimensions of the cage have been downsized compared to the conventional crown-type cage for high-speed rotation.
※● Adoption of JTEKT's original grease
※・Improved lubrication performance under high temperature and high speed conditions
※・The life of the grease is also improved.
※This product further improves the high speed performance of grease lubricated ball bearings to over 1.5 million dmn without increasing the bearing width.